10" ASA elbow made from 10" SST "TEE" 1 run with small flange blank. (Item No. 2850) Cleaned & Tested $795

16"ASA steel elbow w/ 6"ASA rough port & 2 each 3/4" QC ports. Rusty (Item No. 2876) As Is $1,950

2" ASA 304 half nipple 5" L For flat gaskets. Screen in center of weld necks with Good Used $125

3/8" x 45deg flares on sides of screen (Item No. 2648)

3" ASA SST, 3"OD tube, 90o mitre elbow (spec. fab.). (Item No. 2791) Used $175

3" ASA x 4 3/4" L SST Half nipple. 3 " OD tube. No O-R. (Item No. 2663) Used $175

3"ASA x 8 1/2 lg. SST nipple. 3 3/4 I.D. Tube. 1 Rot & 1 non-rot flg. No O-R. (Item No. 2665) Good Used $225

4" ASA SSt flange, 4" copper 90o elbow-brazed. 3/8 tube port. (Item No. 2795) Used $150

4" ASA SST, 4 1/2"OD tube, 90o mitre elbow (spec. fab.) (Item No. 2793) Used $225

6" ASA 304SST 900 radius elbow 5 3/4 ID approx. 12 1/2 C.L. to F-F. With 1/2" pipe coupling Used $450

welded 5" 450 from 6" flange. No O-R. (Item No. 2779)

6" ASA SST 6"OD tube, 90o radius elbow, 2 3/4" CFF port. (Item No. 2801) Used $350

6" ASA SST rough nip 3"l. 1 O-R thread side, 1/8 TC, 1" QC, 1 5/8" valve. (Item No. 2774) Used $425

6" ASA SST half-nip. 8"OD tube x 8 1/2" lg. (Item No. 2805) Unused $150

6" ASA SST SPL Cross. Two 9 1/2 OD FLGS w/o-R, one 7 1/4 OD Flg No O-R (Item No. 2807) Used $350

6" ASA x 5 3/4" ID SST nipple 14.18 Lg. 1 O-Ring (Item No. 2760) Used $400

6"ASA SST Tee 5 3/4id 10 1/2 lg on run w/ 1 OR. 8" Bellow on 19" bell (Item No. 2762) Used $750

8" ASA steel flg welded to 8" pipe. (Item No. 2834) Used

8"ASA x 8" ID Steel nipple 6 1/2" Lg. 1 O-Ring. 2" Elbow outside (Item No. 2832) Used $150