Research Chamber made of 3 crosses. One 12”Dx231/2cross, Two 10”dx151/2”crosses. All have 4ea
14” OD Flgs, 1ea 9” OD flg on top & 6”ASA flg on bottom.14”ODx27/8lg spool between sm
chamber. Lg cross $1,000 Sm crosses $900, All 3 $2500
13 1/2"d x 13 1/2"hi SST chamber. Two 16 1/2" CFF, 3-8"CFF, 1-10"CFF ports. (Item No. 479) Used $3,000
Ballast 12”dx20”L 1 ½” Tube & ¼ FPTin top. ¾ FPT in bot,SST $200
Research Chamber 4-way cross 6”OD Tube 15”l w/8” CFF on top & SPL 10”flg on bot, two 6”CFF
on sides, 5” DN@ 90deg. Two mini & 2 ¾ CFF. ¾ QC No cover Flgs $500
Research chamber 12x12x8 ½ h OD w/ 10” CFFon top. 6 ¾ & mini CFF on one side, 4 ½ CFF 1 side,
4 ½ & mini CFF on other. No cover Flgs POR
16"d x 36"l SST w/c chamber only. See section 1.9. 6" CVC. AST (Item No. 489) As Is $4,000
19 1/2" ID x 36"h SST water cooled chamber with NW-250 pump port. O-R on both end flgs. (Item Good Used $5,000
No. 493)
19 1/4" ID x 40"h SST water jacket chamber w/6" ASA pump port. NW-500 flg on both ends. (Item Good Used $5,500
No. 491)
#21E3671 20”dx20”lg sst w/c by 3/8 copper tube. 25”OD front & rear flanges. 21/2’ vp. 4” Good/Used $4,000
ASA ports on top & sides. 4” ASA pump port out back on w/c elbow. Spl 9 7/8 OD 6 bolt
9” BC flg on bottom. Front flg swings out on arm. Mounted on 4 ½” posts. No pumps or controls.
30" ID x 48" lg, door each end, three 6" ASA ports on top and bottom, misc. 6" & 20" diam. Ports Used $7,500
(Item No. 4576)
36" dia. x 18" h. w/c Sputtering chamber w/6" ASA side port and removable cover, 2 ea 4" VP & misc As Is $5,750
CFF, Rotary table, Connected to 30"x36"x18" load lock listed below. 6" ASA 8" ID HVA SST valve,
on caster frame, 2" HVA SST valve on rough line. (Item No. 4702)
Commonwealth Sci. 38JG ion gun etch. chamber only. Main w/c chamber in 32" ID x 32" lg. w/16" Used $12,750
ASA pump port on side, 3" VP, 3/4" QC, 3 ea. NW-16, 2 ea. 2 3/4" CFF & 5 3/4" ID ports. 21.75"
ID x 20" water jacketed chamber w/25" OD lower flg.-app. 16" ASA port. 15" d x 16" lg. Polycold
coil chamber on one end of main cham. 35" OD hinged flg. Drive motor on other end 35" flg. Rolls out
on linear brgs. (Item No. 5039)
Edwards 27 1/2" d x 29 1/2" h SST chamber weldment ONLY with NW-400 pump port. No W/C, $3,500
for FLC-700 coater (Item No. 107)
Sputtering chamber, 20"od x 11" h, baseplate has 6"ASA pump port Good Used $4,500
multiple 2 3/4 CFF ports, lid has 8 1/2" viewport in top. (Item No. 4499)
Stokes 4'd x5'L SST Vac/Press chamber w/ steel flanges and Safety-Lok door. 150 psi @600F 7/16" h Good $19,500
leads. 5/16" shell tag data. 8" V.P. on door 8"ASA port on top. 4"ASA one side and two 4" ASA and
(1) 6' ASA ports on other side. 10" ASA port w/ 7 HV FT on (Item No. 123)
Three-section SST W/C chamber. 18"d x 8"h top chamber w/removable lid. 10" flanged port out Good $4,750
bottom into top of 21"d x 18"h center chamber that sits on 21"d x 6"h sump. Sump has 20 1 1/4" FT
holes in sides and 10" port out bottom. Four 6" VP in sides of chamber. (Item No. 495)
SST Hoist entry w/ o-ring seal, black body interior coating, 68” Dia x 78” H including dome,
Numerous Conflat and 0-ring flanges Great $15,000
